Maximum power

The MULTI XS 25000 is powerful for batteries that require rapid charging: in your RV, boat, or workshop. The charger automatically adjusts the charge to the battery's temperature. The MULTI XS 25000 has the same handy Supply-mode as the MULTI XS 7000. The MULTI XS 25000 features built-in functions that analyse that status of your battery. Maintenance charging uniquely combines battery requirements of high capacity and long life.

Features

• Eight step, fully automatic switch mode model.
• Revives, charges, checks and maintains virtually all types of 12V lead-acid batteries (Wet, MF, GEL and AGM) from
• 50Ah to 500Ah.
• Desulphation mode with pulses.
• Soft start for severely discharged batteries.
• Recondition mode with controlled top charging recovers the capacity of a severely discharged battery.
• Maintenance pulse charging increases battery life and gives superb performance.
• Supply mode for use as a power pack, battery backup (UPS) or float maintenance.
• Charges even drained batteries.
• Temperature compensated for optimal charging voltage at all times.
• Low back current drain, low ripple and input voltage independent (170-260V).
• High efficiency: 85%
• The charger can be connected for months, ideal for seasonal vehicles.
• Compact design with mounting holes for permanent assembly.
• 2 year warranty.

Uses for charger

RV's
The MULTI XS 25000 provides plenty of power for demanding users.
Cars and tractors
The MULTI XS 25000 is a heavy-duty charger capable of charging a completely drained battery in short order. The charger can also be used as a power source.
Boats
The MULTI XS 25000 is best for boats with larger batteries or requirements for fast charging.

Batteries

The MULTI XS 25000 can be set very easily to charge different types of lead-acid batteries (Wet, MF, GEL and AGM) and conditions. You will find an explanation of the various battery types under Charger University, Battery Types.

The MULTI XS 25000 charges a wide range of battery sizes, from 50Ah to 500Ah.

Safety

• Electronic safe, the charger will not damage vehicle electronics. The battery does not normally need to be disconnected from the vehicle when charging.
• Minimal gas build-up and a patent-pending spark protection system. (however, in supply mode the spark free feature is disconnected).
• Short circuit and reverse polarity protected.
• Double insulation.
• Cooling with power controlled fan.
• Approved for outdoor use, (IP44).
• Progressive temperature protection.

Charging

The MULTI XS 25000 charges and analyses in eight fully automatic steps.
1. Desulphation
Desulphation with pulsing for sulphated batteries.
2. Start
Starting phase for charging. The starting phase continues until the battery's terminal voltage has risen over a preset level. At this point, charging goes into the bulk phase. If the terminal voltage has not reached the preset level within a preset time, charging is suspended. The error mode is indicated. This indicates a battery which is faulty or has too large capacity. If a large battery is charged that has been severely discharged, it may be necessary to restart the charger after a preset time.
3. Bulk
Primary charging where approximately 80% of the charging takes place. The charger delivers maximum current until the terminal voltage has risen to the preset level. After a number of hours, the charger goes on to the next phase, even if maximum voltage is not reached.
4. Absorption
Final charging, voltage is kept at the preset level. During this phase, the current is gradually reduced. If the maximum length of time for Absorption is exceeded, the charger automatically continues with Analysis.
5. Analysis
Charging is suspended for a short period and the battery voltage measured. If it falls too quickly, the battery is probably faulty. Charging is suspended and an error is indicated.
6. Recond
Recond is used to recover severely discharged flooded batteries and for reconditioning severely discharged batteries suffering from stratification. The voltage increases with reduced current for a limited time period (depending on the charge level of the battery at start). The higher voltage starts some gassing and mixing of the acid, which is beneficial for both battery capacity and expected life. The battery could emit explosive gas during this step.
7. Maintenance charging - float
During the first 10 days of maintenance charging the battery is maintained with constant voltage.
8. Maintenance charging - pulse
State of charge varies between 95% and 100%. The battery receives a pulse when the voltage sinks, keeping the battery in good shape when it is not being used. The charger can be connected for months at a time. If the battery is charged and/or the battery's terminal voltage drops, the charger starts a charge pulse until the voltage has reached the preset level. The charge pulse is then interrupted and the cycle is repeated as long as the charger is in pulse maintenance phase. If the terminal voltage drops even lower, the charger automatically reverts to the beginning of the charging curve. If possible, check the water level in the battery.

Using the MULTI XS 25000 gives your battery an optimum service life and operational reliability.

Technical

• Input voltage AC 170-260VAC, 50-60Hz
• Output voltage Nominal: 12V
• Efficiency 85%
• Charging voltage 14.4V, Temperature compensated
• Charging current 25A max
• Back current drain* <2Ah per month
• Ripple** <4%
• Ambient temperature -20°C to +50°C, output power is reduced automatically at higher temperatures.
• Cooling Fan
• Type of charger Eight step, fully automatic, switch mode with pulse maintenance.
• Type of batteries All types of 12V lead-acid batteries (Wet, MF, AGM and GEL).
• Battery capacity 50-500Ah
• Dimensions (L x W x H) 235x130x65mm
• Insulation IP 44 (Outdoor use)***
• Weight 1.4kg

*) Back current drain is what drains the battery if the charger is connected without the power cord connected.

**) Ripple denotes the amount of interference there is to the current and voltage. A high current ripple heats the battery and shortens its life. A linear charger has a current ripple of 70 - 400% which is much larger than the maximum 5% for a modern sealed battery. Voltage ripple could harm other equipment, which is connected to the battery.

The MULTI XS 25000 delivers voltage and current with very low ripple. The battery gains a long service life and there is no risk of damage to other electronic devices connected to the battery.

***) IP 44 cannot be guaranteed unless the charger is positioned with its top or long side facing up.